Cablehead
1-7/16" OD, 1-3/8" Fishneck, Standard GO Connection
Telemetry
Gamma & CCL.
Memory Adapter Tool (MAT)
64MB & CCL.
Gamma Ray
Sodium Iodide Scintillation Crystal
Gradiomanometer (Gradio)
Non-radioactive fluid density.
Dielectric
Fluid capacitance.
Inline Flowmeter
1.688" or 2.125" O.D.
PTF
Quartz pressure, external temperature, & flow.
Fullbore Spinner
5" or 7" Casing.
Continuous Spinner
1.375", 1.688", or 2.125".
Roller Centralizer
1.375" to 9".
1.375 PL Bulkhead
Pressure isolation.
Bowspring Centralizer
1.375" to 7".
Tracer Ejector
Identification of flow behind casing.
3 Sensor Caliper
Casing I.D. inspection.
Dual Gamma Ray
Fluid movement detection.
RA Density
Fluid density.
Dual Spaced Neutron
Formation porosity.
Knuckle Joint
10° Bend angle.
Temperature
External RTD
Flow
Continuous or Fullbore.
1.375" Sinker Bar
GO connection.
Fork Density Meter (FDM)
The fork density meter uses a vibrating fork sensor to measure fluid density and viscosity in a wellbore.
DataCan manufactures and supports the Lee Specialties brand of Production Logging tools. Used for fluid identification and production profiling after completion, these 1.375-inch diameter tools can be run in either Memory or Surface Readout mode, and in conditions with pressures up to 15,000psi and temperatures up to 175°C.